What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
13.06.2025 00:55
One is “what exactly is in a ‘surge protector’ ? ”
An AC voltage/ current source, and an ac inductive load.
Barnstars:
Because the load is inductive, the current lags the voltage.(by a bit).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Now when you have a certain ac resistance, then a current flows in a loop.
Some in Steelers Building Wanted to Go Back to Justin Fields in 2024 - Sports Illustrated
But it can get overloaded, and no longer works.
A circuit breaker is similar, but is resettable.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Upvotes:
This is where the MOV conducts again, and dissipated the energy.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
AI-Focused Apple Music Reboot Said to Be in the Works - MacRumors
so, what happens?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
He then describes Rainy Season and Lightning.
What Happens to Your Blood Pressure When You Eat Grapefruit Every Day? - Verywell Health
2024–10–14 [Omar Gharbi Omar Gharbi ]
The MOV will conduct when the voltage exceeds 50% of line voltage.
There are two important concepts here.
Target and Walmart tariff price hikes leak online from an unlikely source - Mashable
He then asserts :
For this case there are devices called Metal oxide varistors (MOV).
This one hit behind the barn.
Samsung Galaxy S26 Ultra to continue trend of disappointing batteries - PhoneArena
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Kidney disease: 5 symptoms women should be careful about - Times of India
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
These devices are installed between the “hot” and “neutral” and protective ground.
but I think this circuit , shows a few more pieces.
The Trump-Musk feud has been great for X, which jumped up the App Store charts - TechCrunch
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
So, the voltage could go up to 500 volts, and the fuse will not open up.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Will Canadians still buy American products?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
(Dc diagram shown, AC is similar).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Why would my nipples hurt when I touch them?
It seems Mohan does not understand the difference between a comment and an Answer.
nine
I post the exact comment here.
At one ohm, the resistor has a maximum of 1 watt power.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It also is a device that limits the change in current flow.
Best Buy CEO raises red flag about startling customer behavior - TheStreet
This device then solves the entire problem.
The other is “what does a “fuse” do?”
What is lightning?
2024–10–10[John johnson John Johnson ]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
A fuse is a non-resetable over current circuit protector.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
[image of Common-mode choke]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
the problem then depends on "how fast does the fuse operate?".
This is 'the assistant's answer'
eight
Can the fuse protect the electronic devices from lightning instead of a surge protector.
At least they know the answer if they wanted it.
This is where this question deviates from being a 'generic' question, and becomes more specific.
but this device (an Inductor) … impedes the rapid changes in the current.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The bolt then partially travels down the line to your home.
One
The third is lightning and “how it gets conducted into a home.”
2024–10–16 [ OO OLAOYE OYEBODE ]
Here is a simplified AC power diagram.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
What does a fuse do?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
a photo is worth a thousand words.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then describes the function of a fuse.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
First Sentence:
But… the neutral is now “floating” because of the 1 ohm resistance.
These are simplified answers to the original question, and does not change anything I wrote above.
There are three different concepts here that are getting confused.
what exactly is a ‘surge’ protector?
In schematic diagrams this is the symbol for a fuse:
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Edit 2024–10.
[old diagram got deleted by accident]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.